Section 8: Repairs
Bambi Bucket Service Manual – Models 6072-1821 32
3. Secure the spring reel to prevent the reel from
unwinding. This can be done by clamping a small
pair of vice-grips onto the bottom flange of the reel,
locking the reel against the solenoid.
4. Using needle nose pliers, create slack in the cable by
pulling the copper swage close to the drum.
5. Use a small screwdriver and a stiff wire through the
hole in the spring reel drum to remove the end of the
tripline from the locking finger.
Accidental release of a wound spring reel can result in injury to your hands. Wear gloves and use
caution when winding the spring reel or pulling the tripline.
To Next Page
Loading...
Need help?
General
