SEI MIRAGE - Assembly Procedure; Step 1 and 2: Frame and Leg Assembly; Step 3 and 4: Drawer and Knob Attachment

Page
3
Figure 1
Assembly Instructions:
Be careful when assembling. Do
not scratch.
Step 1 Unpack and lay parts on
clean, padded surface
like carpet or blanket.
Check that you have all
parts indicated on the
front page.
Step 2 Attach legs (B1B2,B3,B4)
to Table Frame (A)
using bolt (2) with
washer(1). Tighten bolts
with Allen wrench (3).
Figure 2
Step 3 Insert drawer (C) to the
assembled unit.
Step 4 Attach Knob (4), Plastic
Washer (7) to the front
panel of drawer (C)
using Small Bolts (6) and
Small Washer (5).
Tighten with screwdriver
(not included) as shown
in figure 2.
Now your new accent table
is ready to use.
“MIRAGE” MIRRORED ACCENT TABLE
Assembly Instructions