To Next PageTo Next Page
Need help?Do you have a question about the Seicane S018817 and is the answer not in the manual?
General| GPS | Yes |
|---|---|
| WiFi | Yes |
| Radio | FM/AM |
| Rear View Camera Input | Yes |
| Steering Wheel Control | Yes |
| CPU Clock Speed | 1.6 GHz |
| Operating System | Android |
| CPU | Quad-core |
| Resolution | 1024x600 |
| Touch Screen | Yes |
| Bluetooth | Yes |
| USB Port | Yes |
| SD Card Slot | Yes |
| Supported Audio Formats | MP3, WMA, AAC, FLAC |
| Supported Video Formats | AVI, MOV, RMVB |
Apply parking brake and disconnect the negative battery cable for safety.
Prepare a lever and a screwdriver for the installation process.
Refer to the provided link for specific tools for removal and installation.
Use a lever to remove the two side panels as shown in the picture.
Remove the central cover part, then push the component back into place.
Use a screwdriver to remove all screws located along both side panels.
Utilize a lever to release the plastic panel and then remove it.
Locate and remove the two screws circled in the image using a screwdriver.
Carefully remove the part indicated in the accompanying picture.
Gently extract the existing car radio unit from the dashboard.
Unplug all cables and connectors from the back of the original car radio.
Verify that all accessories for the new Seicane car radio are present.
Attach the wiring harnesses to the rear of the new Seicane car radio.
Connect the Seicane car radio to the existing car radio's plugs.
Turn on the new radio and check if all functions operate correctly.
Insert the new Seicane car radio back into the dashboard.
Return all removed parts to their original positions to complete installation.
It is recommended to have a professional install the unit for optimal results.
Contact Seicane with photos of your car's plugs for wiring diagram support.
