EasyManua.ls Logo

SEIF MINIFOCUS Series User Manual

Default Icon
3 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
• Read the instruction carefully before installationnon-observance of this instruction may cause damage
to the fixture or hurt to human body. The installation must be carried out by a qualified electrician in
accordance with local or national codes.
• Cut off the power supply before installation and maintenance !
• Regularly check the luminaire , the light source , the LED power supply, the cord and other accessories. Any
constructive change of the product shall not be permitted. If any part is damaged, the product
should not be used, please contact the manufacturer.
• If any part is damaged, the product should not be used.
• Keep this instruction manual handy for future use
• The light source of these product are non-changeable light diodes(LED).
• Do not disassemble the product, as the light diode can cause damage to the eyes.
• The production is only for indoor and dry location.
• Use only with SELV power supply or class 2 power supply (For USA market)
• Wasted PCB during transit, delivery, use and scrap disposal can cause certain environment damage.
Please handle it according to “waste electronic products disposal rules” locally.
IP43 weatherproof front only
1
www.self-electronics.com
MINIFOCUS-R1-350 350mA 300mmx300mmx300mm
INSTRUCTION MANUAL
Dimensions: (mm)
Specifications
Components:
Rated InputMode
Minimum Mounting Space
LXWXH
Power ta
-20°C~35°C1W
LAMP x1
15
Ø25
12
ATTENTIONS
Read these instructions completely and carefully.
SERIES: MINIFOCUS
MINIFOCUS
Question and Answer IconNeed help?

Do you have a question about the SEIF MINIFOCUS Series and is the answer not in the manual?

SEIF MINIFOCUS Series Specifications

General IconGeneral
BrandSEIF
ModelMINIFOCUS Series
CategoryWatch
LanguageEnglish

Summary

General Safety Warnings

Product Dimensions

Product Specifications

Components

Tools Required

Installation Guide

Installation on Metal Surface

Step-by-step instructions for mounting the fixture on a metal surface, detailing hole preparation and fixture insertion.

Installation on Wood Surface

Step-by-step instructions for mounting the fixture on a wood surface, including hole preparation and fixture seating.