To Next PageTo Next PageWhy is the screen color unstable on my Seiki SE40FYT?
If the screen color on your Seiki TV is unstable or shows a single color, check the signal cable. If the problem persists, reinstall the PC video card.
Why does my Seiki TV power off suddenly?
If your Seiki TV suddenly turns off, verify the power supply to the TV is stable and not interrupted. Additionally, check if the sleep timer is set or if the Auto Standby feature is activated.
Why my Seiki TV cannot be switched on?
If your Seiki TV cannot be switched on, check that it is properly connected to the power supply. Also, make sure all connected AV devices are switched off before attempting to switch on the TV.
What to do if my Seiki TV has no picture and no sound?
If your Seiki TV has no picture and no sound, first ensure that the TV is switched on. If it is, try tuning to another channel, as the issue might be with the broadcaster.
How to fix Seiki SE40FYT not responding to buttons?
If your Seiki TV is not responding to any button presses, disconnect the power cord from the power socket for a few minutes. Then, reconnect the power cord and try operating the TV as usual.
How to fix vertical bar, horizontal noise and incorrect position on Seiki SE40FYT?
If you observe a vertical bar or stripe on the background, horizontal noise, and incorrect position on your Seiki TV, use Auto configures or adjust clock, phase, or H/V position.
Why is there an unusual sound from inside my Seiki SE40FYT TV?
If you notice an unusual sound from inside your Seiki TV, a change in ambient humidity or temperature may result in an unusual noise when the TV is switched on or off and does not indicate a fault with the TV.
How to fix 'signal is out of range' on Seiki TV?
If your Seiki TV displays 'The signal is out of range (invalid format)', adjust the resolution, horizontal frequency, or vertical frequency.
Why is the reception poor on some channels on my Seiki SE40FYT TV?
If you are experiencing poor reception on some channels with your Seiki TV, the station or cable channel may be experiencing problems; try tuning to another station. If the signal is weak, reposition the antenna for better reception. Also, check for sources of possible interference.
Why is my Seiki SE40FYT TV picture shaking with horizontal/vertical bars?
If your Seiki TV has horizontal or vertical bars, or the picture is shaking, check for local interference such as an electrical appliance or power tool.
Read and retain all safety and operating instructions before use.
Guidelines for safe electrical connections and usage to prevent hazards.
Precautions for physical handling, placement, and environmental conditions.
Step-by-step guide for attaching the TV stand to the unit.
Explains the functions of all buttons on the remote control.
Guides through the first-time setup process, including language and initial configuration.
Solutions for problems like TV not responding or not turning on.
Troubleshooting steps for picture and sound problems.
Solutions for audio output problems, unusual sounds, and audio noise.
General| Screen shape | Flat |
|---|---|
| Response time | - ms |
| Display diagonal | 39.5 \ |
| Display brightness | - cd/m² |
| Native aspect ratio | 16:9 |
| LED backlighting type | - |
| Supported video modes | 480i, 480p, 576i, 576p, 720p, 1080i, 1080p |
| Supported graphics resolutions | 640 x 480 (VGA), 800 x 600 (SVGA), 1280 x 768 (WXGA), 1360 x 768 (WXGA), 1920 x 1080 (HD 1080) |
| Display refresh rates supported | 60 Hz |
| Tuner type | Analog & digital |
| Music apps | Pandora |
| Video apps | Netflix, YouTube |
| DVI port | No |
| PC in (D-Sub) | Yes |
| HDMI ports quantity | 3 |
| USB 2.0 ports quantity | USB 2.0 ports have a data transmission speed of 480 Mbps, and are backwards compatible with USB 1.1 ports. You can connect all kinds of peripheral devices to them. |
| S-Video inputs quantity | 0 |
| Component video (YPbPr/YCbCr) in | 1 |
| On Screen Display (OSD) languages | ENG, ESP, FRE |
| Product color | Black |
| Panel mounting interface | 200 x 200 mm |
| Power consumption (standby) | - W |
| Package depth | 162 mm |
| Package width | 1023.1 mm |
| Package height | 645 mm |
Weight and Dimensions| Depth (with stand) | 208 mm |
|---|---|
| Height (with stand) | 565 mm |
| Weight (with stand) | 6350 g |
| Depth (without stand) | 81 mm |
| Width (without stand) | 909 mm |
| Height (without stand) | 526 mm |
| Weight (without stand) | 5896 g |
