Seiki SM40UNP User Manual

25
OSD SETUP
LANGUAGE
SOURCE
PICTURE
H. Position
V. Position
Phase
Clock
Auto
DisplayPort
Reset
Information
1.2
No
50
50
50
50
AUDIO
PiP/PbP
COLOR
SETUP
: DOWN : EXIT: MENU : UP
OSD Menu Settings
SETUP
To set up H. Position, V. Position, Phase, Clock, Auto,
DisplayPort, Reset and Information.
Touch the
to display the On Screen Display menu.
Touch the
/ to select SETUP.
Touch the
again to enter the setup setting.
Touch
/ to select your desired setting and touch the to
enter. Then use the / to adjust the setting.
Touch the
to exit.
OSD Menu Settings
H. Position
To adjust the horizontal position of the screen.
V. Position
To adjust the vertical position of the screen.
Phase
To adjust delay time of phase in order to reduce the noise of picture.
Clock
To adjust clock frequency in order to get optimized horizontal size.
Auto
To auto adjust Horizontal Position, Vertical Position, Phase(Fine Tune) and Clock(H.Size) of the screen.
DisplayPort
To set the Displayport version.
Reset
To recall factory settings for Video & Audio controls.
Information
To display the information, regarding the current input signal coming from the graphic card in your computer.

Seiki SM40UNP Specifications

General

Brand	Seiki
Model	SM40UNP
Category	Monitor
Language	English