5
• List of tubes
Part No.
Name
PARTS CATALOGUE
0017 255 • Tube for center wheel bridge (B)
0017 259 • Tube for date dial guard (B)
0032 422 • Tube for pallet cock (B)
0032 421 • Tube for balance cock
0017 257 • Tube for date dial guard (A)
0032 420 • Tube for barrel and train wheel
bridge (A)
Part No.
Name
0032 423 • Tube for locking seat for idle wheel
0032 424 • Tube for date driving wheel
0032 425 • Tube for barrel and train wheel
bridge (B)
0033 422 • Dial leg holder pin
0033 421 • Dial leg pin
* The type of holding ring for dial is determined based on the design of cases and dials. Check the
case number and refer to “SEIKO Watch Parts Catalogue CD-ROM” to choose a corresponding
holding ring for dial.
Remarks
3 Holding ring for dial
• Other parts
0341 432 • Regulator
Part No.
Name
0014 414 • Diashock lower frame
0014 413 • Diashock upper frame
0014 417 • Diashock upper spring
• Diashock lower spring
Part No.
Name
0014 415 • Diashock upper hole jewel with
frame
• Diashock lower hole jewel with
frame
0315 420 • Balance staff
0331 420 • Roller with jewel
0345 420 • Stud holder
5 Day star with dial disk
* If any type of day star with dial disk is required, specify the number printed on the disk.
12 Date dial
* The type of date dial is determined based on the design of cases. Check the case number and
refer to “SEIKO Watch Parts Catalogue CD-ROM” to choose a corresponding date dial.
Cal. 4205B, 4206B, 4207B, 4208B, 4225A, 4227A