THE SCREW LOCK TYPE CROWN
The crown can be locked to prevent operating errors.
HOW TO OPERATE SCREW LOCK TYPE CROWN
- Unscrew the crown before the crown operation.
- Screw in the crown when the operation is over.
[To unscrew the crown]
Turn the crown counterclockwise. The crown can be pulled out.
[To screw in the crown]
Turn the crown clockwise until it stops while pressing it.
*The crown can be pulled out after it is unscrewed.
HOW TO USE BUTTON B
Button B is recessed in the watch case to prevent accidental input. Types of buttons differ
depending on the design of the watch.
HOW TO PRESS BUTTON B
Button B is covered except for the
hollow in the middle of the button.
Press the hollow using an object
with a long tapered tip.
Th e u ppe r h al f o f B ut ton B is
covered. Press the lower half of
Button B or press the hollow in the
middle of the button using an object
with a long tapered tip.
Button B is recessed in the watch
case. Press the hollow in the middle
of the button using an object with a
long tapered tip.
To Next Page
Loading...
