ButtonA
1.
Pressonce
andrelease
it.
■ About reception result display
How to check the reception results
1.
Press Button A once and release it.
2.
Check if the reception was
successful (within ve seconds).
successful: Y
(the 10-second position)
BPC
JJY
failed: N
(the 20-second position)
■ If a reception was successful: The second hand points to Y
・
A radio signal has been received successfully. Use the watch without any adjustments.
■ If reception has failed: The second hand points to N.
・
Place the watch in a place where it can easily receive a radio signal, or change its direction.
・
Make sure that the time zone is correctly selected before attempting radio signal reception.
・
Attempt to receive a radio signal in a dierent time period (In the case of manual reception).