Seiko Cal. V17 - Page 5

9
English
English
8
1. Whenthestopwatchisorhasbeenmeasuring,ifthecrownispulledouttothesecondclick,itwill
automaticallyresettheSTOPWATCHhandsto“0.”
2. Itisrecommendedthatthehandsbesettothetimeafewminutesaheadofthecurrenttime,taking
intoconsiderationthetimerequiredtoadjusttheSTOPWATCHhandpositionifnecessary.
3. Whensettingthehourhand,besuretocheckthatAM/PMiscorrectlyset.Thewatchdesignedso
thatthedatechangesoncein24hours.
4. Whensettingtheminutehand,rstadvanceit4to5minutesaheadofthedesiredtimeandthen
turnitbacktotheexactminute.
2. STOPWATCH HAND POSITION ADJUSTMENT
STOPWATCH minute hand
STOPWATCH 1/20-second hand
I If the STOPWATCH hands are not in the "0" position, follow the procedure
below to set them to the "0" position.
A
B
Press for 2 seconds to select the STOPWATCH hand to be adjusted.
STOPWATCH
second hand
l Selection of the hand can be made in the following order by
pressing button for 2 seconds.
A
STOPWATCH
1/20-second hand
STOPWATCH
minute hand
* Theselectedhandturnsafullcircle.
Press repeatedly to set the selected STOPWATCH hand to the "0"
position.
* ThehandmovesquicklyifbuttonBiskeptpressed.
* Afteralltheadjustmentsarecompleted,checkthatthehourandminutehandsfor
timedisplayindicatethecurrenttime.
Push back into normal position in accordance with a time signal.
A
B
CROWN
STOPWATCH second hand
Screw all the way in until it is locked.
CROWN