Seiko Coutura SSC764P User Manual

26 pages

To Next Page

To Next Page

Page #1 background image

Loading...

Page #1 background image

INSTRUCTION MANUAL FOR WATCH CALIBRE

V198

THIS PRODUCT CONTAINS A BUTTON BATTERY

If swallowed or placed inside any part of the body, the battery can

cause severe or fatal injuries within 2 hours or less.

Button batteries are hazardous whether new or used. Keep batteries

out of reach of children.

If you think the battery may have been swallowed or placed inside any

part of the body, seek immediate medical attention. Contact the

Australian Poisons Information Centre immediately on 13 11 26

(New Zealand 0800 764 766) for 24 / 7 fast, expert advice.

Questions and Answers:

Y
yturnerAug 7, 2025
What to do if Seiko Watch second hand doesn't resume one-second movement after charging?
- T
  Tyler WatkinsAug 7, 2025
  If your Seiko watch doesn't resume one-second interval movement after being charged, it could be due to several reasons: * The light the watch has been exposed to was too weak, so recharge the watch sufficiently by exposing it to light. * The built-in IC may have fallen into an unstable condition, in which case you should reset the time. * The watch might have been exposed to extreme temperatures; return it to a normal temperature and then reset the time. * The watch may have been left close to a strong magnetic field; move it away from the magnetic source.
K
Kimberly CarlsonAug 12, 2025
Why does the date on my Seiko Coutura SSC764P change during the day?
- M
  Martin HansonAug 12, 2025
  If the date on your Seiko watch changes during the day, the time is likely set 12 hours ahead of or behind the correct time. Reset the time correctly.
H
Hailey BriggsAug 19, 2025
How to fix Seiko Coutura SSC764P when STOPWATCH hands do not return to '0'?
- J
  jodi51Sep 12, 2025
  If the STOPWATCH hands on your Seiko watch do not return to the '0' position when the stopwatch is reset, it's likely that external sources or an internal IC reset have caused the stopwatch hand positions to move out of alignment. Adjust the STOPWATCH hands to the '0' position.
R
Robert GoodwinAug 25, 2025
What to do if the alarm sub dial and main dial times are different on Seiko Watch?
- C
  Christopher NormanAug 26, 2025
  If the time on the alarm sub dial and the time on the main dial are not the same on your Seiko watch, even though the alarm time has not been set, it may be because the watch has been left close to an object with a strong magnetic field or the watch has been exposed to strong vibrations. Contact the retailer from whom the watch was purchased.
D
David AyalaAug 31, 2025
Why is the inner surface of my Seiko Watch glass clouded?
- D
  Deborah HutchinsonAug 31, 2025
  If the inner surface of the glass on your Seiko watch is clouded, it indicates that moisture has entered the watch because the gasket has deteriorated. Contact the retailer from whom the watch was purchased.

Seiko Coutura SSC764P Specifications

Operating Environment

frequency of crystal oscillator	32, 768 Hz
operational temperature range	–10 °C to 60 °C
loss/gain (monthly rate)	±15 seconds at normal temperature range (5 °C to 35 °C)

Power

power supply	Manganese titanium-lithium rechargeable battery
continuous operating time from full charge	Approximately 6 months
additional function	Energy depletion forewarning function, overcharging prevention function

Summary

Watch Setup Before First Use

Watch Features Overview

Watch Time Display

Details on the hour, minute, and second hands.

Stopwatch Functionality

Explains 24-hour stopwatch with 1/5-second increments and split time.

Single-Time Alarm Setting

Information on setting a single-occurrence alarm within 24 hours.

Perpetual Calendar Function

Explains the automatic date adjustment feature up to year 2100.

Solar Power Operation

Describes the watch's power source and charging mechanism.

Watch Display and Controls

Screw Lock Crown Operation

Switching Display Modes

Time and Hand Position Adjustment

Checking Hand Positions

Steps to verify the correct preliminary positions of all watch hands.

Adjusting Watch Hand Positions

Detailed instructions for manually adjusting the positions of the watch hands.

Setting Main and Alarm Times

Procedure for setting the main time and the alarm sub-dial time accurately.

Perpetual Calendar Functionality

Reading the Calendar Display

Explains how to interpret the calendar display using specific hands.

Checking Calendar Year and Month

Method for viewing the current year and month on the watch.

Adjusting Perpetual Calendar Settings

Step-by-step guide for setting the date, day, month, and year.

Using the Stopwatch

Stopwatch Standard Measurement

Basic procedure for starting, stopping, and resetting the stopwatch.

Stopwatch Accumulated Time

How to measure and restart accumulated elapsed time.

Stopwatch Split Time Measurement

Using the split function to measure intermediate times.

Resetting the Stopwatch

Using the Watch Alarm

Setting the Alarm Time

Step-by-step process for setting the desired alarm time.

Modifying Alarm Time Settings

Procedure for modifying an existing alarm time setting.

Canceling the Alarm

Instructions for deactivating a set alarm.

Alarm Sound Preview

How to preview the alarm sound before it activates.

Charging and Starting the Watch

Overcharging Prevention

Power Reserve Indicator Guide

Charging Time and Accuracy Guidelines

Energy Depletion Warning Function

Troubleshooting: Improper Function Reset

Rotating Bezel Usage

Tachymeter Scale Guide

Measuring Vehicle Speed with Tachymeter

Procedure for measuring vehicle speed using the stopwatch and tachymeter.

Measuring Operational Rates with Tachymeter

Method for calculating operational rates using the tachymeter scale.

Telemeter Functionality

Using the Telemeter

Step-by-step instructions for using the telemeter function.

Watch Troubleshooting Guide

Troubleshooting: Watch Stops or Slow Second Hand

Solutions for watch stoppage and two-second interval second hand movement.

Troubleshooting: Second Hand Movement Issue

Troubleshooting for when the second hand doesn't return to 1-second intervals after charging.

Troubleshooting: Time Inaccuracy

Addressing issues of time inaccuracy due to temperature, magnetism, or shocks.

Troubleshooting: Stopwatch Reset Issue

Fixes for stopwatch hands failing to reset to the '0' position.

Troubleshooting: Alarm and Main Time Mismatch

Resolving differences between alarm and main dial times, often due to magnetism.

Troubleshooting: Clouded Watch Glass

Troubleshooting moisture ingress causing the inner glass to fog.

Troubleshooting: Incorrect Date Change

Correcting issues where the date changes at the wrong time.

Watch Technical Specifications

Related product manuals

Preview: Seiko Coutura SSC788

Seiko Coutura SSC788

Preview: Seiko C-26

Preview: Seiko Cal. 7T32

Seiko Cal. 7T32

Preview: Seiko Cal. V198

Seiko Cal. V198

Preview: Seiko Cal. 5M62

Seiko Cal. 5M62

Seiko Cal. 4R15

Seiko Cal. 6T63

Preview: Seiko CAL. H021

Seiko CAL. H021

Preview: Seiko Credor 6870

Seiko Credor 6870

Preview: Seiko Alarm Chrono 7T32

Seiko Alarm Chrono 7T32