To Next PageTo Next Page
Need help?Do you have a question about the Seiko QC-5500 Series and is the answer not in the manual?
Safety instructions covering DANGER and WARNING for user operation.
Displays current time and serves as secondary clock monitor.
Indicates the power status of the device.
Controls the hands of the master clock.
Monitors secondary clocks on channels 1 and 2.
Controls the hands of the secondary clocks.
Holds the front panel open during installation.
Turns the AC power supply on or off.
Connects input and output signals.
Monitors secondary clocks via a rear wheel.
The main control interface for clock operations.
Connects the grounding conductor for safety.
Houses fuses for power and battery protection.
Internal battery for backup power.
Resets the device's circuit.
Indicates secondary clock output short-circuit.
Steps to safely turn on the Quartz Master Clock.
Verifying the displayed time and calendar.
Manual adjustment of the clock's time and date.
Setting the year for the start of DST.
Setting the month for the start of DST.
Setting the date for the start of DST.
Setting the hour for the start of DST.
Setting the month for the end of DST.
Setting the date for the end of DST.
Setting the hour for the end of DST.
RS-422 output format and communication settings.
Safety warnings and guidelines for installing the clock.
Steps for physically mounting the Quartz Master Clock.
Guidelines for wiring and connecting secondary clocks.
How to connect power and secondary clocks.
Connecting an external master clock for synchronization.
Connecting a DC 24V uninterruptible power supply.
Connecting the Ni-Cd battery pack.
How to properly ground the Quartz Master Clock.
Connecting the GNSS Receiver for time correction.
Fuse replacement instructions, contact dealer.
Cleaning instructions for the clock enclosure.
General
