Seiko Z120 User Manual

QUARTZ TIME RECORDER
USER'S MANUAL
1
1. The details of this User's Manual are subject to change without prior notification.
2. This User's Manual has been prepared with the utmost care to cover all aspects of the time
recorder's use.
If you feel, however, that some explanations are inadequate, unclear, or difficult to
understand, please do not hesitate to contact the dealer or the shop from whom you have
purchased your Time Recorder.
3. Be sure to use your Time Recorder after you have fully understood the hardware and
software specifications and limits.
4. No part of this publication may be reproduced, stored in a retrieval system, or transmitted,
in any form or by any means, mechanical, photocopying, recording or otherwise.
5. Place the time recorder at the position close to the wall outlet so that it is easily accessible
to disconnect.
6. This device is not intended for use in the direct field of view at visual display workplaces.
To avoid incommoding reflections at visual display workplaces this device must not be
placed in the direct field of view.
INTRODUCTION
Thank you for purchasing our Quartz Time Recorder. For safe and
proper operation, please carefully read this manual before using it and
save it for reference.
Q0910-61200
ALL RIGHTS RESERVED
©2013

Seiko Z120 Specifications

Power

input voltage	100-240V
input frequency	50-60Hz
input current	0.45A
output voltage	DC12V
output current	1.5A
power consumption at 120VAC	0.4A
power consumption at 220-240VAC	0.25A

Operating Environment

operating temperature range	-5˚C to +45˚C
operating temperature range in Fahrenheit	+23˚F to +113˚F
operating humidity range	20% to 80%RH

Weight and Dimensions

weight	1.6 kg
width	175 mm
height	244 mm
depth	132 mm

Summary

1. Precautions and Safety

Safety Symbol and Warning Definitions

Electrical Safety Precautions

Details electrical safety to prevent shock and fire hazards.

Operational and Environmental Safety Guidelines

Covers safe operation, preventing drops, spills, environmental conditions, and unit placement.

3. Daily Operation

Punching Time Cards

Explains the basic process of punching time cards.

Override Punching Procedure

4. Setting Date and Time

Setting Display Hours Format

How to configure the hour format (12-hour or 24-hour) on the display.

Setting Current Time

Guide to setting the current hour and minute on the time recorder.

Setting Current Date

Instructions for setting the current year, month, and day.

5. Setting Functions

Setting Pay Period

How to set the pay period type and ending date/day.

Setting Day Advance Time

Configures the time that determines the start of a new day for punching.

Setting Print Format

Allows customization of the printed date and time format.

Setting Weekly Program

Weekly Program Setup Details

Weekly Program Time and Feature Settings

Setting Daylight Saving Time (DST)

Setting DST Start and End Dates

6. Other Functions

Setting and Changing the Password

Inputting the Password

Resetting the Unit

7. Information and Troubleshooting

Error Codes and Actions

Lists error codes, their causes, and recommended actions for troubleshooting.

Other Failures

Default Settings

8. Specifications