WATCH OPERATION
21
WATCH OPERATION
Continued from page 20
Recall
• Press button “A” to show recall mode.
• Press button “B” to switch between lap time and split time.
Lap time: Time of individual lap
Split time: Accumulated time of all laps
• Press button “C” to scroll through stored lap or split times beginning with the last lap stored.
• Press button “D” to scroll through stored lap or split times beginning with the first lap stored.
HOW TO USE THE COUNTDOWN TIMER:
• Press button “A” for Timer mode.
• Press button “B” for 2-3 seconds to enter the Timer mode (minutes begin to flash).
• Press button “C” to select an item (flashing) to be adjusted. With each press of the button, a flashing item
changes over in the following order (minute – hour).
• Press button “D” to adjust the selected item.
• Press button “B” to set the timer.
• Press button “C” to Start/Stop.
• Press button “D” to reset.
HOW TO SET ALARM TIME:
• Press button “A” to show Alarm mode.
• Press button “B” for 2 to 3 seconds to enter Alarm mode (hours begin to flash).
• Pressing button “D” selects Alarm 1 or Alarm 2.
• Press button “C” to select an item (flashing) to be adjusted. With each press of the button,
a flashing item changes over in the following order: (Hour, Minute)
• Press button “D” to adjust the selected item
• Press button “B” to return to alarm mode.
HOW TO ENGAGE/DISENGAGE ALARM:
• Press button “A” to show alarm mode.
• Press button “C” to alternately engage and disengage alarm.
* The alarm sounds at the designated time for 20 seconds. To stop it manually, press any one of the four buttons.
* To test the alarm, press and hold buttons “C” and “D” at the same time in the Time/Calendar mode.
SNJ019 P. 5
To Previous Page
Loading...
Need help?
General
