Why has my Seiko SSC642P stopped working?
If your Seiko Watch stops operating, it's likely that the energy has been depleted. To resolve this, recharge the watch sufficiently by exposing it to light.
Why did my Seiko Watch stop working?
Your Seiko Watch might have stopped operating because the energy has been depleted. To resolve this, recharge the watch sufficiently by exposing it to light.
Why does my Seiko Watch date change during the day?
If the date on your Seiko watch changes during the day, the time is likely set 12 hours ahead of or behind the correct time. To fix this, reset the time correctly, referring to 'TIME SETTING AND HAND POSITION ADJUSTMENT.' (P. 11)
What to do if small second hand moves at two-second intervals on Seiko SSC642P?
If the small second hand on your Seiko watch moves at two-second intervals, it indicates that the energy is running short. Recharge the watch sufficiently by exposing it to light.
Why is my Seiko SSC642P Watch second hand moving at two-second intervals?
If the small second hand on your Seiko Watch moves at two-second intervals, it indicates that the energy is running short. Recharge the watch sufficiently by exposing it to light to resolve this issue.
What to do if the date on my Seiko SSC642P Watch changes during the day?
If the date on your Seiko Watch changes during the day, it means the time is set 12 hours ahead of or behind the correct time. To fix this, reset the time correctly.
What to do if my Seiko Watch second hand moves at two-second intervals?
If the small second hand on your Seiko Watch moves at two-second intervals, it indicates that the energy is running short. Recharge the watch sufficiently by exposing it to light.
Why does the date change during the day on my Seiko SSC642P Watch?
The date on your Seiko Watch might be changing during the day because the time is set 12 hours ahead of or behind the correct time. To fix this, reset the time correctly.
What to do if my Seiko SSC642P Watch has been charged, but the second hand does not resume one-second interval movement?
If your Seiko Watch has been charged for longer than the time required for full charge, but the second hand does not resume one-second interval movement, it could be due to several reasons: * The light the watch has been exposed to was too weak. * The built-in IC has fallen into an unstable condition. * The watch has been left or worn in extremely high or low temperatures. * The watch has been left close to an object with a strong magnetic field. Correct this condition by moving and keeping the watch away from the magnetic source. Return the watch to a normal temperature so that it works accurately as usual, and then reset the time.
What to do if STOPWATCH hands do not return to the 0 position when the stopwatch is reset on Seiko Watch?
If the STOPWATCH hands do not return to the 0 position when the stopwatch is reset, it may be because the stopwatch hand positions have moved out of correct alignments. Adjust the STOPWATCH hands to the 0 position by following the instructions in 'TIME SETTING AND HAND POSITION ADJUSTMENT.' (P. 11)
To Next Page
General