To Next PageTo Next PageWhat to do if the STOPWATCH hands do not return to the 0 position when the stopwatch is reset on my Seiko SSC642P?
If the STOPWATCH hands on your Seiko Watch do not return to the 0 position when the stopwatch is reset, it might be because the stopwatch hand positions have moved out of correct alignments, being affected by external sources, or because the internal IC had been reset. Adjust the STOPWATCH hands to the 0 position.
What to do if my Seiko SSC642P Watch stopped after charging?
If your Seiko watch has been charged for longer than the required time for a full charge, but the second hand does not resume one-second interval movement, it could be due to several reasons: 1. The light the watch has been exposed to was too weak. In this case, recharge the watch sufficiently by exposing it to light. 2. The built-in IC has fallen into an unstable condition. To resolve this, reset the watch by following the instructions in 'IMPROPER FUNCTION.' (P.28) 3. The watch has been left or worn in extremely high or low temperatures. Return the watch to a normal temperature so that it works accurately as usual, and then reset the time. 4. The watch has been left close to an object with a strong magnetic field. Correct this condition by moving and keeping the watch away from the...
General