Seiko TH-2B - Shuttle Hook Removal; Point Adjustments Overview; Needle Position to Feed Dog Hole

12 Removal shuttle hook
Pull-down the opening & closing
lever(A) instructed in the fig-li
tnd then pull-down It rlghtward
and remove -t—the outer hook ring
(B) at the raised position oi
feed dog instructed in the
Pig-3 shows removal of the shuttle
Setting the shuttle hook can he
made in the contrary order of
the above description.
rig- 2
Fig- 1
ri
13 Adjusting on the each points , * x. f7-B
(A)Adjusting needle position against needle hole of feed dog.(
Ledle^hoild he positioned
feed dog and moved together , the amount
out) of feed shaft ("PP®r\acrew(3) and needle
screw(3) •
(Needle dorpping point
is to be set at the center
of needle hole of the feed
dog.)
(Note) ^ . .. .
Peed shaf t(upper) connector( AU4;
should be fixed by the screw(3)
without moving feed shaft(upper)
connector(A)(4).
- 9 -
From the library of: Superior Sewing Machine & Supply LLC