Seiko TH-2B - Presser Foot Timing Adjustment

@Eaoh timiag for up/down moving amount of presaer foot (2B & 8B only)
a Timing of inside preeser Snwnina the^lever°®
before needle—eye reaches to feed dogi after downing
of nrlsaei- bar lifter, turning the balance wheel toward you.
AdjS^ln? irmade by two set torews(2) of upward & downward
By^up"! doTO^lifting eooentriot-1'inside Presser foot against
needle is touch with feed dog either speedily or slowly.
As for 2B Type, adjusting feed dog and outer presser foot
to
set at same point on the upper face of the needle plate.
b For the setting of inside presser foot and outside presser
foot e(iuivalently, the lifting eccentric connection crank
pinch acrew(3) io "to be adjusted.
Ajustment should be made by the materials being sewn.
c Up/down moving amount of inside presser foot and outside
presser foot
can be obtained by loosing the screwt4;.
Upthe 3crew(4)i the amount increases.
Down the screw(4) , the amount decreases.
J
— 1 3 —
From the library of: Superior Sewing Machine & Supply LLC