15
English
ALARM
[ALARM TIME SETTING]
● When the time function is displayed in the 24-hour indication, the alarm is also displayed in the 24-hour
indication.
● The flashing digits move quickly if button C is kept pressed.
● When setting the hour digits in the 12-hour indication, check that AM/PM is properly set.
● If the watch is left untouched in the ALARM SETTING display with the digits flashing, it will
automatically return to the ALARM mode in 1 to 2 minutes.
● The alarm can be tested by keeping buttons B and C pressed at the same time in the CALENDAR or
TIME mode.
STOPWATCH
● With each press of button C, the light illuminates the digital display with a beep.
● After measuring 60 minutes, the stopwatch will start counting again from “00'00"oo” as many times
as necessary until it is stopped.
● When measuring a long period of time, press button A to return the STOPWATCH mode to the
CALENDAR or TIME mode after the stopwatch starts. This will prevent any possible malfunction.
To Next Page
Loading...
