Seiko V172 - Resetting the Stopwatch; Tachymeter Usage

27
English
English
26
TACHYMETER
(for models with tachymeter scale on the dial)
l
Tachymeter scale can be used only when the time required is less than 60 seconds.
TO MEASURE THE HOURLY AVERAGE SPEED OF A VEHICLE
Use the stopwatch to determine
how many seconds it takes to
go 1 km or 1 mile.
Tachymeter scale indicated by
the STOPWATCH 1/5-second
hand gives the average speed
per hour.
Ex. 1
STOPWATCH 1/5-
secondhand:
40seconds
Tachymeterscale:"90"
“90” (tachymeter scale figure) x 1 (km or mile)
= 90 km/h or mph
Ex. 2: If the measuring distance is extended to 2 km or miles or shortened to 0.5 km or
miles and the STOPWATCH 1/5-second hand indicates “90” on tachymeter scale:
"90" (tachymeter scale figure) x 2 (km or mile) = 180 km/h or mph
"90" (tachymeter scale figure) x 0.5 (km or mile) = 45 km/h or mph
TO MEASURE THE HOURLY RATE OF OPERATION
Use the stopwatch to measure
the time required to complete
1 job.
1
Tachymeter scale indicated by
the STOPWATCH 1/5-second
hand gives the average number
of jobs accomplished per hour.
2
Ex. 1
STOPWATCH 1/5-
secondhand:
20seconds
Tachymeterscale:"180"
“180” (tachymeter scale figure) x 1 job
= 180 jobs/hour
Ex. 2: If 15 jobs are completed in 20 seconds:
"180" (tachymeter scale figure) x 15 jobs = 2700 jobs/hour
1
2