SEIS EP8 - Names of parts; Part list and descriptions

16
(A)
External type battery
*1
(B)
Battery mount
*2
(C)
Drive unit
(D)
Drive unit cover (left side and bottom side)
(E)
Crank arm
(F)
Chainring unit
(G)
Speed sensor
*3
(H)
Shifting unit
*4
(I)
Disc brake rotor
(J)
Switch unit (assist switch)
(K)
Switch unit (shifting switch) or shifting lever
(L)
Cycle computer or junction [A]
(M)
Electric wire
(N)
Chain device
(O)
Built-in type battery
*1
(P)
Battery charger
*1 Depending on the assist bicycle, the battery may be installed at a location different from the position specified in the
figure.
*2 The battery mount of the built-in type battery is attached inside the frame.
*3 It is attached to one of the two locations specified in the figure.
*4 Electronic gear shifting: DI2 rear derailleur or motor unit + DI2 internal geared hub
Mechanical gear shifting: rear derailleur or internal geared hub