Need help?Do you have a question about the SEIS EP8 and is the answer not in the manual?
Guidance on safely handling the electric bicycle battery to prevent hazards.
Specific safety advice regarding malfunctions, E-TUBE ports, cleaning, and handling.
How to connect the bicycle system to PCs for customization and firmware updates.
Checklist for essential inspections before riding the bicycle for safety.
Overview of the main user manual and its contents for SHIMANO STEPS.
Explanation of different assist modes and customization options for riding comfort.
How to adjust riding comfort settings via cycle computer or E-TUBE PROJECT.
Step-by-step instructions for charging the battery for external and built-in types.
Instructions for powering on the electric bicycle system and turning it off.
How to select and change assist modes using the cycle computer or junction unit.
How to switch to and use the walk assist mode for pushing the bicycle.
Procedure to deactivate the walk assist function by pressing the X button.
How to switch between automatic and manual gear shifting modes using the shifting switch.
Visual guide and labels for identifying the various parts of the SHIMANO STEPS system.
Detailed list and explanation of the various components of the SHIMANO STEPS system.
Troubleshooting common problems related to the assist function, symptoms, causes, and remedies.
Addressing issues with short traveling distance and stiff pedaling.
General| Input Voltage | 100-240 VAC |
|---|---|
| Operating Temperature | 0°C to +40°C |
| Cooling | Natural Convection |
| Input Frequency | 50-60 Hz |
| Protection | Over Voltage |
To Next Page