EasyManua.ls Logo

Sel 3355-2 - Front- and Rear-Panel Diagrams

Sel 3355-2
12 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Schweitzer Engineering Laboratories, Inc. SEL-3355-2 Data Sheet
5
Front- and Rear-Panel Diagrams
Figure 7 SEL-3355-2 Front Panel
Figure 8 SEL-3355-2 Rear Panel
q LAMP TEST Button. Press and hold to test front-panel LEDs. Can be programmed to be an on/off or reset button.
w ENABLED and ALARM LEDs provide operational status. A green ENABLED LED indicates normal operation. The ALARM LED
illuminates red when a nonoptimal system condition exists.
e ETHERNET Status Indicators. Link (LNK) indicates that the port is connected, and activity (ACT) indicates when data are
being transmitted and received.
r SERIAL Status indicators. Transmit (TX) and receive (RX) LEDs indicate activity on serial ports.
t PINHOLE Button. Provides reset and power functions; requires a pushpin to prevent accidental use.
y HDD Activity Indicator. Illuminates when SATAv drives are accessed.
u AUXILIARY Status Indicators. Three programmable, bicolor LEDs for your custom application.
i USB Ports. Two easily accessible ports to connect USB 3.1 peripherals.
o SATA Drive Bay. Removable cover plate enables easy access to SATA drives from the front panel.
iy
o
q w e r ut
q DVI-D. Connect digital monitors by using native DVI or an HDMI adapter.
w ETH1 and ETH2. Onboard independent Gigabit Ethernet interfaces.
e USB Ports. Connect as many as four USB 3.1 peripherals at the rear panel.
r AUDIO Ports. Line Input (blue), Line Output (green), and Microphone Input (pink).
t COM1 and COM2. Standard EIA-232 serial ports with configurable +5 Vdc power on Pin 1.
y DISPLAYPORT. Connect new digital monitors supporting the DisplayPort interface.
u ALARM. The Form C alarm contact output can be wired either normally closed or normally open.
i PCI Expansion Slots. Install SEL or third-party PCI or PCI Express expansion cards for additional network, serial, or other
application-specific I/O.
o Earth Ground Terminal Screw. The earth ground connection for the SEL-3355-2.
a POWER Supply Modules. The rated input voltage is clearly marked on the chassis near the terminals.
i
rwe t y u o
a
q

Related product manuals