Selden TYPE RB Mk 4 - Before Sailing

9
Sail dimensions
Foruptodatesaildesigninformation,pleaseseethesailmakersguide,595-542-E.
Port
Fig. 9:1
Starboard
Before sailing
1. CheckthatthesailiscorrectlyfurledontheSTARBOARDSIDEoftheluffextrusion.(SeeFig.9:1).
2. Furlandunfurlthesailacoupleoftimestoensurethatthesystemworksasitshould,andtofamiliarize
 yourselfwithitsoperation,andalsotocheckthatthesailiscorrectsize.
3. Theareaaftofthemastmustbefreefromhalyardsetc.orthesecanbecaughtbythesailduringthe  
 furlingprocedure.
Note. For correct furling, pull on starboard part of the endless
furling line for the line driver to turn clockwise.
4. AttachtheclewtotheOuthaulCar.
5. Hoistthemainsailwhilstsimultaneouslyensuringthatitisfeedingcorrectlyintotheluffextrusion.
6. Jointhesailtothetackhook.(Seeg.8:3).
7. Tightenthehalyard.
8. Furlthesailuntilonly200-300mmoftheclewisexposed.Thelinedrivershouldbeturnedclockwise.
 (SeeFig.9:1).