Select Brands Tru - Cleaning and Maintenance

13
CLEANING AND MAINTENANCE
Proper maintenance will ensure many years of service from your appliance. Clean the appliance after every use. This appliance contains no user
serviceable parts and requires little maintenance. Do not try to repair it yourself. Leave any servicing or repairs to qualied personnel.
WARNING: Always press the Power Button to turn the appliance o and disconnect the plug from the wall outlet before cleaning. Allow all parts
of the appliance to cool down completely. NEVER touch the Portalter, Brew Head, or Steam Wand Sleeve immediately after brewing or steaming.
Allow the appliance and all parts to cool thoroughly before cleaning.
NOTE: The Portalter and Filters should be emptied and rinsed thoroughly with warm water after every use.
NEVER IMMERSE THE ESPRESSO MAKER OR POWER CORD IN WATER OR ANY OTHER LIQUID.
TO CLEAN THE PORTAFILTER, FILTERS AND BREW HEAD:
• The 1-Cup and 2-Cup Filters and Portalter should be rinsed under water immediately after use to clean. The Cleaning Pin can be used to remove
coee grounds from the opening on the bottom of the Filters and Portalter.
• It is recommended to run a single shot cycle through the machine with the Portalter in place, but without any coee grounds, to rinse any
coee particles out of the Brew Head.
• The inside of the Brew Head should be wiped with a damp cloth to remove any coee particles.
TO CLEAN THE APPLIANCE EXTERIOR AND CUP WARMER:
• Use a soft, damp cloth to clean the appliance exterior and Cup Warmer. Do not use any scouring agents or harsh cleaners.
TO CLEAN THE STEAM WAND:
• The Steam Wand should always be cleaned after frothing milk.
• Use a damp cloth to remove the Steam Wand Sleeve and wipe it down. Rinse the sleeve under running water to clean any milk from the interior
of the sleeve.
• Wipe the Steam Wand with a damp cloth.
• Manually purge the Steam Wand to remove any excess milk.