TEC Series v 3.2X
Page 49
Pressing "6" displays the time zone information on the LCD display located on the front panel of the
TEC. When first selected, the display defaults to the data in Time Zone 0. Press any key from 0
through 7 to see the data for Time Zones 0 through 7. Press “*” to return to the Display Data menu.
Pressing "9" displays the Access Group information on the LCD display located on the front panel of
the TEC. When first selected, the display defaults to the data in Access Group 0. The TEC displays
Access Group and the Access Levels that are valid for that Access Group. Press any key from 0
through 7 to see the data for Access Groups 0 through 7. Press “*” to return to the Display Data
menu.
Pressing "7" displays the holiday information on the LCD display located on the front panel of the
TEC. When first selected, the display defaults to the data for holiday 0. Press any key from 0
through 8 to see the data for holidays 0 through 8. Press “*” to return to the Display Data menu. A
time zone can be set that is only valid on Holidays, for applications that require different hours of
access on Holidays.
DISPLAY HOLIDAYS
DISPLAY TIME ZONE
DISPLAY ACCESS GROUPS
Pressing "8" displays the access level information on the LCD display located on the front panel of the
TEC. When first selected, the display defaults to the data in Access Level 0. Press any key from 0
through 7 to see the data for Access Levels 0 through 7. The TEC displays Access Level, the doors
that are valid, and the Time Zone selected for that Access Level. Press “*” to return to the Display
Data menu.
DISPLAY ACCESS LEVELS
To Next Page
Loading...