TEC Series v 3.2X
Page 68
Pressing the menu election “9” is used with a terminal for sub-menu choices 1 through 5.
Data is sent to the screen. It is used to print various parameters, such as Time Zones, Holidays,
Access Levels, Access Groups and general Information. Sub-menu choices 6 through 9 send data to
the LCD display on the front panel of the TEC. To select this function, press "9" from the Main Menu.
You will see the displays, shown below
DISPLAY DATA
Menu 1
Menu 3
Menu 4
Menu 5
Menu 2
Menu 7
Menu 6
SETUP AND PROGRAMMING
(CAT Shown. TEC is similar.)
To Next Page
Loading...