Select Sound 8028 - Menu Settings (Continued); Ringing Melodies and Volume Adjustment; Alarm Clock Settings; Do Not Disturb (DND) Configuration

› Setting alarm clock
 1.Inon-hookstate,pressSET/FLkey,LCDdisplays
 2.Press3key,LCDdisplays“AL1-2-3”.Press1keytosetthefirstalarm
 clock,LCDdisplays“ALAROFF”.inputtimebypressingdigitkeydirectly,
 thenpressSET/FLkeytoconfirm.PressUPorDOWNkeytosetitONstate
 orOFFstate.Thesamewaysettingfromgroup2andgroup3.Total3
 groupsofalarmclocksetting.
3. TheFirstalarmclockmeansonetimeclockbutthesecondandthethirdalarm
 clockasalarmeveryday,theunitwillquitthealarmstatebypressinganykey.
› Setting Do Not Disturb
 1.Inon-hookstate,pressSET/FLkey,LCDdisplays,
 2.Press4key,LCDdisplay“off_r 00 00“,thendigitflash,inputtimeby
 pressingdigitkeydirectlyandthenpressSET/FLkeytoconfirm.After
setting,LCDwilldisplaythedonotdisturbtimeandcountdowntilltimeup.
DoNotDisturbtimewillbeendwhenthetimeuportakehandsetorpress
 H.Fthenquit.Whenincomingcall,noringduringthedonotdisturbtime.
› Setting flash, dialing mode and anti-thief switch on/off
 1.Inon-hookstate,pressSET/FLkey,LCDdisplays,
 2.Press5key,LCDdisplay“1-f2-pt3-d”,
3. Press1key,LCDdisplay,thenpressUPorDOWNtoselectflashtimeal
 90ms,95ms,100ms,120ms,180ms,300ms,600msor1000ms,defaultis600ms.
4. Press2key,LCDdisplay“pttone”,thenpressUPorDOWNtoselectdialing
 mode,meansthetonedialingmodeandmeansthepulsedialingmode.
Note:1)P/Talsocanbeswitchedbythefollowingway:Inon-hookstate,
pressnumberbutton“1”andlastaround22secondstillLCDdisplay“SAVE”to
switchthePulseandTonemode,defaultsettingisTonemode);
2)Whileinthepulsemode,press‘*’buttonbeforeorduringdialingthenthe
dialingmodewillbechangedfromPulsetoTonemode.Ifyoupressandrelea-
setheHook-Switch,thedialingmodelwillreturntoPulsemode.