Select Sound 8028 - Menu Settings (Continued); Dialing Code Configuration; LCD Brightness Adjustment; IP Function Settings

5.Press3key,LCDdisplay“defendoff”,thenpressUPorDOWNtoselect
anti-thiefswitchon/off,“defendoff”meansswitchoffand“defendon”means
switchon.
› Setting area code and PABX code
Setting area code
 1.Inon-hookstate,pressSET/FLkey,LCDdisplays,press6key,LCD
 displays“1-LOC2-OL”
 2.Press1key,LCDdisplay“loc--------“pressdigitkeydirectlyandthen
 pressSET/FLkeytoconfirm.Total8digitareacodecanbeset.Pressone
 newgroupdigittocanceltheformersettingareacode.
Setting PABX code
 Press2key,LCDdisplay“outoff”.pressdigitkeydirectlyandthenpress
 SET/FLkeytoconfirm.PressUPorDOWNkeycancancelPABXcodesetting.
 Total8digitsPABXcodecanbeset.Pressonenewgroupdigittocancelthe
 formersettingPABXcode.
› Setting bright contrast
 Aton-hookstate,pressSET/FLkey,LCDdisplays,press7key,LCDdisplay
 “LCDcon4”,pressUPorDOWNkeytoadjustthebrightcontrast,default
 the3grade,total5gradesselectable.
› Setting IP function
 1.Aton-hookstate,pressSET/FLkey,LCDdisplays,press8key,LCDdisplay
 LCDdisplay“1-au2-IP”,1isforautoIPand2isformanualIP.
 2.Press1key,LCDdisplay“auIPoff”,pressUPorDOWNkeytoselectautoIP,
 17909,17908,193,17911,17921,17931,17951,17991,068,96300,96333,
 196,190,17969,197,offselectable.
 3.Press2key,nodisplayinLCD,inputdigitdirectlyandthenpressSET/FL
 keytoconfirm,IP1isokayonceLCDdisplay“ip1code”.