Selecta MACRO User Manual

INSTRUCTIONS MANUAL CODE 80158.02 REV 0 02/10/09 (It can be modified without notice) Page: 11
J.P. SELECTA s.a. Ctra. NII Km 585.1 Abrera 08630 (Barcelona) España Tel (34) 93 770 08 77 Fax (34) 93 770 23 62
e-mail: selecta@jpselecta.es - http://www.jpselecta.es
2. Status:
There are 4 status:
• STP: “Stop”. This is the default state. Controller is waiting from user orders.
• RUN: On this state the controller is running a temperature / time program.
• PRG: Programming: State for program creating or editing.
• CFG: Configuration basic options as language, or calibration.
Note: On states: PRG and CFG, the controller returns to STP state if any key is pressed after 10 seconds.
Note: Once a program is running can be stopped by pressing R/S key.
3. Main menu:
S ºC MIN PR STA
1 145 31 1 STP
S ºC MIN PR STA
1 145 31 1 PRG
SELECTION STA
Celsius CFG
S ºC MIN PR STA
1 145 31 1 RUN
CALIBRATE STA
00ºC CFG
LANGUAGE STA
English STP
Cursor
R/S
+ 5 seg.
+ 5 seg.
Validate
Validate
Validate
To programming menu
“ON”
Use keys to choose
Celsius or Fahrenheit scale.
Use keys to enter a
temperature offset.
Use keys to choose the
language.
1. Information on the display:
S ºC MIN PR STA
1 145 31 1 STP
Step
Temperature
Time.
Program
Status.
Note: Pay atten-
tion where the
“cursor” is.
PROGRAMMING R.A.T. 2 TEMPERATURE CONTROLLER.
Program running

Selecta MACRO Specifications

General

Brand	Selecta
Model	MACRO
Category	Laboratory Equipment
Language	English