Selecta PRESOCLAVE III PLUS 50L

Need help?

Do you have a question about the Selecta PRESOCLAVE III PLUS 50L and is the answer not in the manual?

Summary

Safety

Safety Icons

Identifies risky situations and safety measures that should be adhered to.

Operator Risks

Lists potential hazards like hot surfaces, steam, and electrical risks.

Qualified Users

Specifies that only trained personnel should operate the equipment.

General Information

Technical Specifications

Contents and Accessories

Standard Contents

Lists items included as standard with the equipment.

Available Accessories

Details various optional accessories available for the autoclaves.

Introduction to Autoclaves

Key Definitions

Defines key terms used in the manual, such as sterilization and disinfection.

Equipment Description and Features

Equipment Components

Details the physical components and safety systems of the autoclave.

Operational Features

Lists the key operational specifications and capabilities of the autoclaves.

Control Panel Overview

Touch Screen Interface

Provides a close-up view and explanation of the touch screen interface.

External Element Identification

Identifies and locates various external controls and connectors on the equipment.

Installation Guide

Door Unblocking Procedure

Operating the Autoclave

Opening the Lid Safely

Details the procedure and conditions required to safely open the autoclave lid.

Starting an Autoclave Cycle

Outlines the steps to prepare and begin an autoclave cycle.

Cycle Programming and Execution

Program Selection

Explains how to choose a sterilization program using the interface.

Program Modification

Details how to adjust temperature and time for selected programs.

Initiating the Cycle

Describes the process of starting the sterilization cycle after programming.

Work Cycle Stages

Explains the sequence of events during an autoclave cycle (purging, sterilization, cooling).

System Settings and Configuration

Display and Output Settings

Configures language, screen brightness, and printer options.

System Time Configuration

Sets the system's date and time.

Calibration and Offset Adjustment

Allows temperature offset adjustment via password entry.

Data Management and System Information

Manages data logs, units, and displays software information.

Maintenance Procedures

Temperature Calibration

Explains how to adjust the temperature readings of the equipment.

Safety Thermostat Operation

Describes the safety thermostat and how to rearm it.

Gasket Inspection and Replacement

Details the importance of gasket condition and replacement.

Chamber Cleaning

Provides instructions for cleaning the internal chamber of the autoclave.

Error Messages and Troubleshooting

Spare Parts Information

Emergency Lid Opening

Sterilization Best Practices

Bulk Instrument Sterilization

Guidance on sterilizing instruments placed loosely in trays for optimal steam passage.

Tubing Preparation and Placement

Instructions for preparing and placing tubing for sterilization.

Vessel Sterilization Guidelines

Advises against sealed vessels and how to place open ones.

Liquid Sterilization Procedures

Guidelines for sterilizing liquids, including filling limits and vessel types.