Need help?Do you have a question about the Selectronic SP PRO Series and is the answer not in the manual?
Identifies hazardous voltages and stored energy within the SP PRO system.
Safety information regarding battery handling, hazards, and voltage precautions.
Details the SP PRO's role and functionality in off-grid power supply systems.
Guidance on calculating appropriate battery pack size for system needs.
Overview of the SP PRO's front panel controls, indicators, and interface.
Explains the SP PRO's battery management features for optimal performance.
Details on configuring and operating the automatic generator control system.
How the generator is controlled based on battery State of Charge (SoC).
Guides on site selection, ventilation, and safety for optimal performance.
Step-by-step instructions for installing SPMC model inverters.
Step-by-step instructions for installing SPLC model inverters.
Introduction to the SP LINK software for configuring the inverter.
Explains how to modify advanced parameters within the SP LINK software.
Configuration for automatic generator start based on system conditions.
Guidelines for routine checks, cleaning, and maintenance of the SP PRO.
Common issues and solutions for the SP PRO inverter.
Technical specifications, standards compliance, and product details.
Identifies hazardous voltages and stored energy within the SP PRO system.
Safety information regarding battery handling, hazards, and voltage precautions.
Details the SP PRO's role and functionality in off-grid power supply systems.
Guidance on calculating appropriate battery pack size for system needs.
Overview of the SP PRO's front panel controls, indicators, and interface.
Explains the SP PRO's battery management features for optimal performance.
Details on configuring and operating the automatic generator control system.
How the generator is controlled based on battery State of Charge (SoC).
Guides on site selection, ventilation, and safety for optimal performance.
Step-by-step instructions for installing SPMC model inverters.
Step-by-step instructions for installing SPLC model inverters.
Introduction to the SP LINK software for configuring the inverter.
Explains how to modify advanced parameters within the SP LINK software.
Configuration for automatic generator start based on system conditions.
Guidelines for routine checks, cleaning, and maintenance of the SP PRO.
Common issues and solutions for the SP PRO inverter.
Technical specifications, standards compliance, and product details.
General| Grid Interactive | Yes |
|---|---|
| Off-Grid Capability | Yes |
| Warranty | 5 years |
| Model | SP PRO Series |
| Battery Voltage | 48V |
| AC Voltage | 230V |
| AC Frequency | 50Hz |
| MPPT Range | 120V to 450V |
| Protection | Overload, Overvoltage, Short Circuit, Over Temperature |
| Communication | Ethernet |
| Cooling | Fan |
| Weight | 25kg to 45kg |
To Next Page
