Need help?Do you have a question about the Selectronic SP PRO and is the answer not in the manual?
Explains warranty terms and how to use the manual for safe and effective operation.
Provides a summary of the SP PRO's capabilities and applications in various system types.
Details the advantages of using the SP LINK software for configuration and monitoring.
Highlights critical safety information and precautions for installing the SP PRO unit.
Outlines general installation guidelines, environmental considerations, and site preparation.
Step-by-step guide for mounting and preparing the SP PRO (SPMC/SPLC models).
Details cabling, fusing, system configuration, and communication setup for the SP PRO.
Introduces the SP LINK software for configuring, monitoring, and managing the SP PRO.
Importance of following commissioning processes for correct system verification.
Standard checks applicable to all SP PRO based power systems for verification.
Verification procedures for managed AC coupled, generic AC coupled, and DC coupled systems.
Lists and explains the front panel controls and indicators of the SP PRO.
Detailed description of the SP PRO's operation and configuration for system requirements.
Focuses on battery management, state of charge monitoring, and the five-stage charging cycle.
How the SP PRO manages renewable energy and controls generators in different system modes.
General guidelines for maintenance performed by authorized integrators.
Instructions for cleaning the fan and filter to ensure optimal operation.
Procedures for monitoring the SP PRO's operation and resetting default settings.
Steps and information to diagnose and resolve common issues with the SP PRO.
Lists the standards and compliance requirements the SP PRO adheres to.
Detailed technical specifications, ratings, and dimensions of the SP PRO models.
Explains warranty terms and how to use the manual for safe and effective operation.
Provides a summary of the SP PRO's capabilities and applications in various system types.
Details the advantages of using the SP LINK software for configuration and monitoring.
Highlights critical safety information and precautions for installing the SP PRO unit.
Outlines general installation guidelines, environmental considerations, and site preparation.
Step-by-step guide for mounting and preparing the SP PRO (SPMC/SPLC models).
Details cabling, fusing, system configuration, and communication setup for the SP PRO.
Introduces the SP LINK software for configuring, monitoring, and managing the SP PRO.
Importance of following commissioning processes for correct system verification.
Standard checks applicable to all SP PRO based power systems for verification.
Verification procedures for managed AC coupled, generic AC coupled, and DC coupled systems.
Lists and explains the front panel controls and indicators of the SP PRO.
Detailed description of the SP PRO's operation and configuration for system requirements.
Focuses on battery management, state of charge monitoring, and the five-stage charging cycle.
How the SP PRO manages renewable energy and controls generators in different system modes.
General guidelines for maintenance performed by authorized integrators.
Instructions for cleaning the fan and filter to ensure optimal operation.
Procedures for monitoring the SP PRO's operation and resetting default settings.
Steps and information to diagnose and resolve common issues with the SP PRO.
Lists the standards and compliance requirements the SP PRO adheres to.
Detailed technical specifications, ratings, and dimensions of the SP PRO models.
General| Category | Battery Charger |
|---|---|
| Output Voltage | 12V/24V/48V (selectable) |
| Battery Compatibility | Lead-acid (AGM, GEL, Flooded), Lithium-ion |
| Communication | CAN bus |
| Operating Temperature | -20°C to +50°C |
| Charging Stages | Bulk, Absorption, Float, Equalization |
| Protection Features | Overvoltage, Overcurrent, Short-circuit, Over-temperature, Reverse polarity |
| Model | Selectronic SP PRO |
| Cooling | Temperature controlled fan |
To Next Page
