33
If you have already inserted the 2nd SIM card before connecting the router to
the power supply, now press "Switch SIM" in the "SIM" field. The display
changes to "Loading SIM". "SIM 2" will then appear in the "SIM" field.
If the display persists after a long time after pressing "Switch SIM" with
"Loading SIM", then refresh or reload the display and press "Switch SIM" again.
The display in the "SIM" field now changes the status several times. The change
is complete when "SIM 2" is displayed in the "SIM" field. It is now necessary to
enter the PIN of the 2nd SIM card for the first time so that the SIM card can
establish a connection with the mobile network.
To do this, tap on "Enter PIN" in the "SIM" field. In the window that now opens,
enter the four-digit PIN of your SIM card and press "Save PIN". The router is
now registered with the mobile network.
The connection was successful if the new network operator ID and the network
used are displayed in the "SIM" field. You can then establish an active
connection to the Internet by pressing the "Connect" button. Alternatively, the
router establishes this connection itself after a short time. The connection
status in the "SIM" field is displayed (green: connected; orange: disconnected).
If you often use different foreign SIM cards or change your main SIM card,
please remove the PIN stored in the user interface before replacing the SIM
card in the device. To do this, press “Enter PIN” and then “Save PIN” without
having entered a PIN. After inserting a new SIM card, press "Enter PIN", then
enter the new PIN and press "Save PIN".
To Next Page