EasyManua.ls Logo

Selkirk SuperVent 2100 - User Manual

Selkirk SuperVent 2100
48 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
1
&&
&&
&
SELKIRK CORPORATION
5030 Corporate Exchange Blvd. SE,
Grand Rapids, MI 49512
1.800.992.VENT (8368)
SELKIRK CANADA CORPORATION
950 South Service Road, Second Floor
Stoney Creek, ON L8E 6A2
1.888.SELKIRK(735.5475)
SUPERVENT 2100 (JM)
SUPERPRO 2100 (ALT)
01/25/21 3010440
&
A MAJOR CAUSE OF VENT
RELATED FIRES IS FAILURE TO
MAINTAIN REQUIRED
CLEARANCES (AIR SPACES) TO
COMBUSTIBLE MATERIALS.
IT IS OF THE UTMOST
IMPORTANCE THAT THIS
CHIMNEY SYSTEM BE
INSTALLED ONLY IN
ACCORDANCE WITH THESE
INSTRUCTIONS.
PLEASE READ ALL INSTRUCTIONS
BEFORE BEGINNING YOUR
INSTALLATION.
FAILURE TO INSTALL THIS SYSTEM IN
ACCORDANCE WITH THESE
INSTRUCTIONS WILL VOID THE
CONDITIONS OF CERTIFICATION AND THE
MANUFACTURER'S WARRANTY.
Installer: It is of the utmost importance that
these instructions are left with the
homeowner.
Homeowner: Keep these instructions and
maintenance guide in a safe place for
future reference.
I
NSTALLATION INSTRUCTIONS
&
M
AINTENANCE GUIDE
(CANADA & UNITED STATES)
650°C FACTORY BUILT
INSULATED CHIMNEY
Tested to Standards
CAN/ULC-S629
&
UL 103 Type HT
LISTED
LISTED
Question and Answer IconNeed help?

Do you have a question about the Selkirk SuperVent 2100 and is the answer not in the manual?

Summary

CERTIFICATION LABELS

PRE-INSTALLATION GUIDELINES

TYPES OF APPLIANCES

Details the appliances compatible with the chimney system.

MINIMUM CLEARANCE TO COMBUSTIBLES

Specifies minimum air space clearance to combustible materials.

ATTIC INSULATION SHIELDS

Explains the requirement and installation of attic insulation shields.

FRAMING DETAILS

TOOLS REQUIRED

Lists the necessary tools for installation.

DECORATOR CEILING SUPPORT INSTALLATION

Details the installation of the ceiling support component.

STOVE PIPE ADAPTER (ASE) INSTALLATION

ATTIC INSULATION SHIELD (AIS) INSTALLATION

ATTIC INSULATION SHIELD (AIS) ALTERNATE METHOD

ELBOW INSTALLATION

45° ELBOW INSTALLATION

Specific guidelines for installing 45-degree elbows.

OFFSET INSTALLATION COMPONENTS

FIRESTOP SPACER INSTALLATION

Instructions for installing the firestop spacer at each level.

CORNER SHIELD PLATE INSTALLATION

Guidance on installing the corner shield plate for offsets.

WALL SUPPORT (AWS) INSTALLATION

ADJUSTABLE INTERMEDIATE WALL SUPPORT (AIWS)

Instructions for the intermediate wall support if height exceeds AWS limits.

WALL SUPPORT (WS) INSTALLATION

WALL THIMBLE AND SUPPORT ASSEMBLY

WALL SUPPORT INSTALLATION METHODS

WALL BAND (WB) INSTALLATION

CATHEDRAL CEILING SUPPORT (CCS) INSTALLATION

Instructions for supporting the chimney with a sloped ceiling.

ROOF SUPPORT (RS) INSTALLATION

RAFTER RADIATION SHIELD (RRS) INSTALLATION

Shield required below roof line enclosure.

ROOF FLASHING INSTALLATION

UNIVERSAL ROOF GUY KIT INSTALLATION

MASONRY ADAPTER KIT (MAK) INSTALLATION

MAINTENANCE AND CHIMNEY CLEANING

CREOSOTE AND SOOT FORMATION

Explains the formation and need for removal of creosote and soot.

CHIMNEY FIRES AND SAFETY PROCEDURES

ADAPTER PLATE (AP) FOR MASONRY FIREPLACE

Instructions for connecting to a masonry fireplace.

REPLACEMENT PARTS LIST

OFFSET CHIMNEY INSTALLATION CHARTS

CHIMNEY HEIGHT ABOVE ROOF CHART

CONNECTOR PIPE CLEARANCE CHART

Clearance requirements for connector pipes below cathedral support.

INSTALLATION RECORD AND PRODUCT INFORMATION

Selkirk SuperVent 2100 Specifications

General IconGeneral
BrandSelkirk
ModelSuperVent 2100
CategoryFireplace Accessories
LanguageEnglish

Related product manuals