Troubleshooting
Problem Cause Solution
Motor is not functioning,
transmission control light
is not lit
Batteries are dead Insert new batteries
Batteries are incorrectly
inserted
Insert batteries correctly
Motor is not functioning,
transmission control light
is lit
Receiver outside the
radio range
Reduce distance to the
receiver
Transmitter is not
programmed in the receiver
Programme transmitter
Transmission control light
and the word BATTERY
is displayed
Batteries are running out Insert new batteries
Astro programme does not
function according to the
switching times
Date is incorrect Set correct date
Wrong city or wrong
latitude/longitude set
Set correct city or exact
degrees latitude/longitude
Holiday function is
switched on
Switch holiday function off
Astro shift is set Adjust astro shift
The i-R Multi Send/
i-R Multi Send Plus does not
carry out the switching
commands
The sliding switch is
on manual
Move the sliding switch
to automatic
The i-R Multi Send/
i-R Multi Send Plus does not
carry out the switching
commands precisely
Holiday function is
switched on
Switch holiday function off
Venetian blind does not
move to the end limit
No end limit position is set Set the end limit position
using the setting menu
PROG END LIMIT
The transmitter does not
react after the batteries
have been changed
Power supply has been
interrupted for too long
Press the RESET button,
check settings
To Next Page
Loading...