'"
Troubleshooting
4ROUBLESHOOTING
Problem Cause Solution
Motor is not functioning, trans-
mission control light is not lit
Batteries are dead Insert new batteries
Batteries are incorrectly inserted Insert batteries correctly
Motor is not functioning, trans-
mission control light is lit
Receiver outside the radio range Reduce distance to the receiver
Transmitter is not programmed in
the receiver
Programme transmitter
Transmission control light and the
word BATTERY is displayed
Batteries are running out Insert new batteries
Astro programme does not function
according to the switching times
Date is incorrect Set correct date
Wrong city or wrong latitude/
longitude set
Set correct city or exact degrees
latitude/longitude
Holiday function is switched on Switch holiday function off
Astro shift is set Adjust astro shift
The iveo Multi Send does not carry
out the switching commands
The sliding switch is on manual Move the sliding switch to auto-
matic
The iveo Multi Send does not
carry out the switching commands
precisely
Holiday function is switched on Switch holiday function off
Venetian blind does not move to the
end limit
No end limit position is set Set the end limit position using the
setting menu PROG END LIMIT
The transmitter does not react after
the batteries have been changed
Power supply has been interrupted
for too long
Push RESET, check settings
To Next Page
Loading...