SEM 266 - Page 2

READ CAREFULLY BEFORE USING
Proper care of your new paper shredder will ensure many years
of trouble free operation, with a minimum of maintenance or repair.
CAUTION: Before operating the shredder, remove the red shipping tabs and screws. These
should be retained in case of re-shipping needed, to avoid damages. These are located in
two areas: Front panel inside door (2 screws, 2 washers and 2 red tabs) Cutting head open-
ing, above waste basket (2 screws, 2 washers and 4 red tabs)
Content. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Page No.
Installation and Operation 3
Feeding and Overloading. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3
Maintenance. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4
Specifications. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5
Ordering and Optional Spare Parts 5
Micrographics Tip 5
Machine Frame Diagram and Parts Breakdown. . . . . . . . . . . . . . . . . . .6-7
Cabinet Diagram and Parts Breakdown. . . . . . . . . . . . . . . . . . . . . . . . .8-9
Cutting Head Diagram and Parts Breakdown. . . . . . . . . . . . . . . . . . .10-11
Electrical Diagram and Parts Breakdown. . . . . . . . . . . . . . .. . . . . . . .12-17
Covers Diagram and Parts Breakdown. . . . . . . . . . . . . . . . . . . . . . . .18-19
AdditionalSEMProducts 20
CUSTOMER SERVICE
Fax: 508-366-6814
Email: info@semshred.com
Security Engineered Machinery
P. O. Box 1045
Westboro, MA 01581
Tel: 800-225-9293
Website: www.semshred.com
Order On-line:
GSA Customers
Commercial Customer
www.fedshred.com
www.semshred.com
,