SEM 22 - User Manual

Operation and Maintenance Manual
SEM Model 1012, 1012/5, 22, 22/5, 23, and 23/5
Disintegrator with Fan System Value Kits
POP-0116 Rev. 0 | Created 5-9-19 | ECN-00450
For sales, service, parts, and customer support, contact us:
SECURITY ENGINEERED MACHINERY
5 Walkup Drive • Westborough, MA 01581
info@semshred.com
1-508-366-1488 • Toll Free US 1-800-225-9293
www.semshred.com

Summary

Disintegrator Safety Rules

Unpacking and Installation

Electrical Service Connections

Pre-Operational Procedures

Electrical System Test

Verifying voltage and motor rotation direction for safe operation.

Pre-Operational Checklist

A comprehensive checklist to ensure the disintegrator is ready for operation.

Disintegrator Starter Diagram

Electrical System Notes

Troubleshooting Common Issues

Service Instructions

Knife Recommendations and Adjustments

Knife Removal and Adjustment Procedures

Detailed steps for removing and adjusting cutting knives.

Bed Knife Installation

Rotor Knife Installation and Setting Procedures

Rotor Knife Installation Procedure

Knife Setting Procedure

General Cutting Chamber and Knife Settings

Knife Grinding (Sharpening)

Electrical Current and Tool Requirements

Procedure to Open;Close the Disintegrator

Standard Machine Safety Latch

SEM 22 Specifications

General

Sheet Capacity	22 sheets
Shred Type	Strip-cut
Shredding Capacity	22 sheets
Throat Width	220 mm
Dimensions	380x260x580 mm