Sena 3S PLUS - GETTING STARTED; Button Operation

QUICK START GUIDE
Phone Pairing
There are three ways to pair the phone.
Initially Pairing the Headset
The headset will automatically enter the phone pairing mode when you
initially turn on the headset or in the following situation:
• Rebooting after executing Factory Reset; or
• Rebooting after executing Delete All Pairings.
=
1s
HOLD
=
Select 3S PLUS
Device A
Device B
......
Sena 3S PLUS v1.0
Bluetooth
l
l
LED
STATUS
=
PIN
NUMBER
Note:
• The phone pairing mode lasts for 3 minutes.
• To cancel pairing, tap the (+) Button or (-) Button.