Sena DWO6-PRO - Speed Dialing

13
3.2 Speed Dialing
1. Press and hold the (+) Button for 3 seconds
and you will hear a mid-tone single beep
and a voice prompt, “Speed dial”.
2. Tap the (+) Button or the (-) Button to
navigate between the menus. You will hear
prompts for each menu item.
3. Tap the Center Button to select a voice
menuamongthefollowings:
(1) Last number redial
(2) Speed dial 1
(3) Speed dial 2
(4) Speed dial 3
(5) Cancel
4. After selecting the last number redial menu,
“Last number redial”. Then, to redial the
last phone call number, tap the Center
Button.
5. To call one of the speed dials, tap the (+)
Button or the (-) Button to navigate between
the menus until you hear a voice prompt,
“Speed dial (#)”. Then, tap the Center
Button.
6. If you want to exit the speed dial
immediately, tap the (+) Button or the
(-) Button until you hear a voice prompt,
“Cancel”, and tap the Center Button.