Sena DWO6-PRO - Seek and Save; Scan and Save; Temporary Preset

23
9.3 Seek and Save
1. Double tap the (+) Button or the (-) Button
to search up or down the station dial.
2. To save the current station, press and hold
the Center Button for 3 seconds until you
hear a voice prompt, “Preset (#)”.
3. Tap the (+) Button or the (-) Button, in order
to select which preset number you want for
thatspecicstation.(Youcansaveupto10
preset stations.)
4. To save the current station, press and hold
the (+) Button for 1 second. You will then
hear a voice prompt, “Save preset (#)”.
5. To delete the saved station in the preset
number, press and hold the (-) Button for 1
second. You will then hear a voice prompt,
“Delete preset (#)”.
9.4 Scan and Save
1. Press and hold the (+) Button for 1 second.
2. The Sena tuner pauses at each station it
ndsfor8secondsbeforemovingtothe
next.
3. To save a station while scanning
frequencies, tap the Center Button at that
station. You will hear a voice prompt, “Save
preset (#)”. The station will be saved as
the next preset number.
9.5 Temporary Preset
The Temporary Station Preset feature
automaticallyndsandsavesthenearest10
radio stations without changing your existing
preset stations.
1. Tap the (+) Button 3 times to automatically
scan for 10 temporary preset stations.
2. The temporary preset stations will be
cleared when the headset is powered off.