Sena SM10 - Using the SM10; Wired Connections

English
15
6.1 Connections
The SM10 has one AUDIO IN Port and one AUX Port for wired
connection with other devices.
s!5$)/).-AINSTEREOAUDIOINPUT
Two types of stereo audio cables are included in the package,
3.5mm 4-pole stereo audio cable and 3-pole stereo cable. If
YOU NEED TO USE PLAYBACK CONTROL OVER "LUETOOTH !62#0
for the stereo audio device with playback control such as
iPhone, you may use the 3.5mm 4-pole stereo audio cable.
sAUX: Auxiliary audio input
You may use a 3.5mm stereo audio cable, either 3-pole or
4-pole to connect the auxiliary audio devices.
Whenever there is an incoming AUX signal, the volume of
AUDIO IN signal is down to a certain level. If you are riding
motorcycle with onboard audio system, you may use optional
ACCESSORYCABLESFORMODELSPECIlCAUDIOSYSTEMS&ORMORE
information on the optional accessories, please visit www.
senabluetooth.com.
6. USING THE SM10