Need help?Do you have a question about the Sena SP49 and is the answer not in the manual?
Indicates charging status with a red LED light.
Indicates the battery is fully charged with a blue LED light.
Turn the device on or off by pressing the Phone Button and Jog Dial for 1 second.
Adjust volume by rotating the Jog Dial clockwise or counter-clockwise.
Pair the headset with a mobile phone via Bluetooth following step-by-step instructions.
Play or pause music by pressing and holding the Jog Dial for 1 second.
Navigate music tracks by rotating the Jog Dial while pressing it.
Answer calls by tapping buttons; end calls by tapping or pressing the Jog Dial.
Activate voice dialer or speed dial using specific button presses.
Reject an incoming call by pressing the Jog Dial for 2 seconds.
Pair two headsets for intercom by holding the Jog Dial for 5 seconds until LEDs flash.
Start or end an intercom conversation with the first friend by tapping the Jog Dial once.
Start or end an intercom conversation with the second friend by tapping the Jog Dial twice.
Start or end an intercom conversation with the third friend by tapping the Jog Dial thrice.
Turn the FM radio on or off by pressing the Phone Button for 1 second.
Scan the FM band by double-tapping the Phone Button to start or stop.
Save current stations as presets and cycle through them using the Phone Button.
Scan for stations by rotating and pressing the Jog Dial.
Enter the configuration menu by pressing and holding the Jog Dial for 10 seconds.
Configure headset settings via USB using the Sena Device Manager software.
Configure headset settings using the Sena Utility App on your smartphone.
Restore device to factory settings by holding the Phone Button and confirming with Jog Dial.
The device automatically resets when the USB charging cable is connected and it turns off.
Store in clean, moderate temperature environments to prevent damage.
Avoid cleaning solvents, chemicals, or direct contact with fuels/solvents.
Handle carefully, avoid drops, shocks, painting, or unauthorized modifications.
Understand motorcycling risks; ensure helmet fits well and is securely fastened.
Fasten chinstrap correctly and replace helmet after any impact or accident.
Inspect helmet regularly; no helmet provides absolute protection.
Comply with regulations, protect hearing, avoid hazardous conditions.
Avoid hazardous environments; do not use damaged batteries or chargers.
Use approved chargers, store within temperature range, avoid heat and damage.
Device complies with FCC Part 15 and Class B limits for residential installations.
Adheres to FCC RF limits; unauthorized modifications void operation authority.
Device complies with Industry Canada license-exempt RSS standards.
Dispose of electronics and batteries at designated collection points for recycling.
Product conforms to US DOT FMVSS 218 helmet safety standards.
Sena guarantees product quality; warranty covers defects, not misuse or damage.
Sena is not liable for loss or damage resulting from product use or misuse.
Warranty covers specific periods; terminates with product transfer or tampering.
Using the product implies waiver of claims and acceptance of all associated risks.
Exercise caution when using the product while operating vehicles.
Warranty void if product is misused, modified, or not maintained; no implied warranties.
User assumes all risks; Sena not liable for injury, death, or property damage.
Sena's liability is capped at the product's purchase price for repair or replacement.
Sena not liable for damages from misuse, unauthorized parts, accidents, or acts of God.
Send defective product with proof of purchase for free repair or replacement.
To Next Page
General