Brakes
Ensure brakes are working correctly, all braking system components are free from
damage and properly secured. When you fully squeeze the brake levers, ensure
neither the front nor rear brake levers touch the handlebar. Take your bike to a
certified, reputable bike mechanic to have the brakes repaired if you find a problem.
Tires and wheels
Your wheels should always spin straight and must be repaired or replaced if they
wobble side to side or up and down when spinning. If your wheels become untrue or
the spokes loosen, which can happen with normal use, we recommend that a certified,
reputable bike mechanic performs all wheel tuning and truing operations on your bike
from Senada Bikes.
Do not attempt to true wheels or tighten spokes unless you have adequate knowledge,
tools, and experience. Ensure the tires and inner tubes are in good working condition
without any visual damage and have the correct amount of air pressure. Always
replace tires and inner tubes with punctures, cuts, or damage before you ride, in case
of tire and component wear, and make your riding unsafe.
Quick Release Levers
There is a quick-release lever located on your e-bike for securing the seat tube. This
To Next Page
Loading...