Need help?Do you have a question about the SENADA AUSTIN and is the answer not in the manual?
Charge at 0-45℃, discharge at -20-60℃. Keep battery dry, avoid liquids, fire, heat, and high temps.
Prohibited for under 12s; 12-16 needs adult supervision. Read manual carefully. Do not lend to inexperienced riders.
Torque values for handlebar, stem, seat, wheels. Covers wheel alignment and tire condition checks.
Proper assembly ensures safety, performance, comfort. Professional checks recommended, even for experienced users.
Ensure required safety equipment is used and all laws pertaining to electric bikes are followed in your region.
Using non-original parts can jeopardize safety, void warranty, and cause non-compliance with laws.
Always check the condition of your bike before riding, in addition to regular maintenance. Consult a mechanic if unsure.
Familiarize yourself with the e-bike's electrical system, power assistance levels, and lighting for optimal operation and safety.
Ensure brakes are working correctly, free from damage, and properly secured. Check lever clearance with handlebar.
Wheels should spin straight. Check for wobbling or loose spokes. Ensure tires and inner tubes are in good condition and properly inflated.
Quick-release levers secure the seat tube and can loosen during transport or rides. Regularly check their security.
Ensure all hardware and accessories are secured per manufacturer instructions. Check for issues and consult a mechanic if unsure.
Understand suspension fork operation, adjust for weight/terrain. Ensure handlebar alignment and secure grips. Replace worn grips.
Ensure the battery is charged, operating properly, and the charger is unplugged and stored safely before riding.
How to connect the charger to the battery to start charging. Indicator light turns green when fully charged.
Instructions for turning the bike on using the battery key and the display on/off via the power button.
Dashboard shows power in 5 grids: high, medium, low, after bike is turned on.
Learn how to turn the headlight on or off using the '+' button.
Set Pedal Assist System (PAS) from 0 to 1 for power assist. Start from lower PAS levels is advised.
Overview of the LCD display unit showing energy bar, speed, PAS, ODO, and trip meter.
Details on what the display shows: speed, power, error codes, mileage, voltage, push assist, cruise control.
Functions controlled via the display: power switch, headlight switch, and 3.75 mph push assist setting.
Speeds for lever positions (1-5) for power assist, including WALK mode and cruise control.
Description of all display elements: energy bar, speed, PAS, and various indicators.
Icon and explanation for the headlight indicator on the display.
Explanation of the battery power display bar on the LCD screen.
Details on the multifunctional display area showing ODO, TRIP, VOL, and TM.
How to adjust power-assisted level (PAS) using digital and bar display, from 0 to 5.
Explanation of the E-bike status display area, including Cruise and Walk assist modes.
Info on speed display area showing current, maximum, average speed in mph or km/h.
Explanation of status display area and instrument status code meanings for errors.
Table of status codes (E00-E10) and meanings: Normal Status, Battery Under voltage, Motor Failure.
Instructions for turning the LCD display on/off using the power button (short vs. long press).
How to increase ('+') or decrease ('-') pedal assist level from 0 to 5.
Switch between average, max, and instantaneous speed displays by long-pressing '+' and '-' buttons.
Activate/deactivate WALK mode, cruise control, and turn headlight on/off using buttons.
To Next Page
General