SENADA AUSTIN - Change the pedal assist levels; Switch speed display content; Set;release 6 Km;h (3.75 mph) WALK mode, cruise control, and the headlight

27
II
、
Change the pedal assist levels
1. Short press the
“+”
button to increast the pedal assist level from 0 to 5
2. Short press the
“-”
button decreast the pedal assist level from 5 to 0
III、Switch speed display content
1. Long press the
“+”
and
“-”
buttons at the same time to switch the display
between the average speed, the maximum speed and the instantaneous speed.
IV、Set/release 6Km/h (3.75mph) WALK mode, cruise control, and the headlight
1. When the bike is stand still and ready, press and hold the
“-”
button to enter the
6KM/h (3.75mile/h) boost cruise mode. Press any brake lever to exit this mode.
2. When the bike is in the power-assisted running state (during riding), press and