2.
Power on: Refer to Figure 2, turn the key on the battery; refer to Figure3,
press and hold to turn on/off the display.
3.
Power display: After the power is turned on, the dashboard lights up to display
the power. The power is displayed in 5 grids, corresponding to high, medium and low
power.
4.Front light: Refer to Figure 3, press and hold “+”to turn on/off the headlight.
5.Start the Pedal assisted riding mode: Short press“+”to set the PAS from
0 to 1, pedal the bicycle,start the power assist mode. If you don't need power
assistance, you can turn off the power or turn off the battery or set the PAS to 0.
Please always start riding from lower PAS level.
To Next Page
Loading...