Before riding the bike, check whether the brakes are working. When you use the brake,
please activate the rear brake first, and then the front brake.
Pay attention to the brake tightness. If the brake is too loose, use an Allen key to
tighten it. Pay attention to the braking distance, it will increase when riding in rain or
snow.
Please be sure to wear a safety helmet when riding the e-bike, follow the traffic rules,
and do not drive on motorized lanes and roads with many pedestrians.
Please check the tire pressure before riding. The recommended tire pressure is
35~45PSI. When riding on downhill and non-paved roads, make sure the speed does
not exceed 15km/h (9.3mph). When using the motor, please be careful not to hit the
wheels vigorously and keep the rotating shaft lubricated. It is not allowed to ride with
more than the maximum load (265 lbs or 120kg).
After use, please do not park the bike in the building hall, evacuation stairs, or safety
exits. Please park the bike correctly in accordance with the procedures and safety
information detailed in this manual and local policies.
To Next Page
Loading...