EasyManua.ls Logo

Sencor ONE 2020 - Folding and transport

Sencor ONE 2020
17 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
EN 9
EN
Revision 10/2021Copyright © 2021, Fast ČR, a. s.
Folding and transport
2. If the battery level drops below 30%, the maximum speed of the electric scooter is
limited to a maximum of 15 km/h. If the battery level drops below 25%, the speed
will be limited to a maximum of 10 km/h.
ALERT:
Do not modify or tamper with the protective mechanisms of the electric scooter
(Scooter One 2020). This will prevent damage to the individual components of
the electric scooter (Scooter One 2020).
6. Folding and transport
1. The scooter must be turned off. Hold the scooter, unlock the folding mechanism
release lever at the bottom of the handlebar tube and fold the released lever into the
travel direction.
2. Lower the loose handlebar tube towards the rear fender to secure it with the
handlebar hook and notch on the rear fender. Proper folding for transport
3. To carry, hold the Scooter One 2020 by the handlebar tube. For more comfortable
transport, we recommend holding the handlebar tube at a third of its length, on the
side closer to the front wheel.

Related product manuals